Нова дробильна установка Kensan VSI-700

Kensan Closed Vertical Crusher VSI-700
Rotor Diameter, mm - 700,
Engine, kwa - 132
Feeding Material Size, mm - 0-30,
Weight, kg - 8000,

KENSAN MAKINA vertical crushers are tertiary crushers used for crushing hard and abrasive materials ranging from 0 to 40 mm, cubing them, and producing sand.

They are produced in two types: with closed and open rotors. Stones of a maximum size of 0-40 mm can be fed into crushers with a closed rotor. Since returned material may contain particles larger than these sizes, they are definitely not suitable for crushing the returned material.

Vertical crushers crush the material fed into the rotor, by throwing it at a speed of about 67-80 m/s, and by striking the naturally formed stone box on the stator, the stone lining, and the material entering the system from the outside of the rotor (crushing stone to stone).

Vertical crushers are used for pulverizing materials with a hardness of less than 9 grade and a moisture content of less than 9%. The materials should be non-flammable and non-explosive minerals.

ADVANTAGES

• Low Cost
• High efficiency and low energy consumption
• High reduction ratio
• Ability to crush hard materials
• Less noise and environmental pollution
• Low maintenance cost and time