Паперорізальна машина Polar 115 XT

Workflow
The material to be cut is brought to an optimum working height on the right side with a loading lift
placed in the jogger by the operator using the optional counting scale
and jogged there
and then transported via a transfer table element to the front table of the high-speed cutter
After cutting
placed on the unloading lift with stacking aid
Polar stacking lift LW 1000-4
from yr. 2004
Platform 80x126mm
The automatic lifting of the material to be cut allows the operator to cut in a way that is convenient for him
ergonomically favorable working height the material into the automatic jogger or directly into the
load the cutting machine
However
the stacking lift can also be used for stacking cut material and has an adjustable stacking aid
Stacking lifts do not need to be anchored in the ground and can therefore be easily moved
They are equipped with continuously adjustable reflex light barriers for automatic lifting or lowering
Automatic jogger RA-4 with air spreading roller
from yr. 2004
After the jogging process is completed
the air is pressed out of the cutting layer
You can spread 1 or 2 times
whereby the pressing pressure of the first spreading operation can be adjusted
is and when the table is tilted also “strike out” in between
Table size 900x1150mm stainless steel plated
Layer height min. 30 mm
Layer height man. 165 mm
Table height 860 – 950 mm
Compressed air requirement at 6 – 8 bar approx. 2L/min
Polar 115 XT cutting machine with direct touch control
from yr. 2004
– nickel-plated transfer air corners
– nickel plated air table
– two Resopal air side tables 100×100
Cutting length 1150 mm
Insert height max. 165 mm
2 Knives
Unloading lift with stacking device Polar Mohr Stacking lift LW 1000-4-EV
Platform 80x126mm
The automatic lifting of the material to be cut allows the operator to cut in a way that is convenient for him
ergonomically favorable working height the material into the automatic jogger or directly into the
load the cutting machine
However
the stacking lift can also be used for stacking cut material and has an adjustable stacking aid
Stacking lifts do not need to be anchored in the ground and can therefore be easily moved
They are equipped with continuously adjustable reflex light barriers for automatic lifting or lowering
Stacking device – side alignment ruler and back wall facilitates edge accurate
manual backstacking of the material to be cut after cutting