Пастеризатор KHS Innopas P II SG 30-200

Machine type: tunnel pasteurizer
Capacity: approx. 24,000 - 25,000 bottles/hour (depending on bottle format)
Treatment area: 113.5 m²
Treatment zones: 8 (H1-H3, S, P, C1-C3 plus cooling tower zone), 3 recuperative
Max. pasteurization temperature: 75.0 °C (0.7 l) / 72.5 °C (0.33 l)
Inlet temperature: 15.0 °C; outlet temperature: approx. 32 - 38 °C depending on format
Total treatment time: approx. 48.6 min (0.7 l) / 77.1 min (0.33 l)
Pasteurization units: approx. 5 PE
Machine water content: approx. 14.4 m³
Water consumption at nominal capacity: approx. 1.5 m³/h
Heat consumption at nominal capacity (0.7 l): approx. 3,672 MJ/h
Electrical connection: 400 V, 50 Hz
Dimensions (L x W x H): approx. 21,000 x 4,210 x 2,750 mm
Required entry opening: approx. 2.7 x 3.0 m
Noise level: ≤ 85 dB(A) according to ISO 3744
Immediately. Location: Germany. Loading by the seller is possible
net weight: approx. 27,500 kg
engine power: approx. 66.2 kW
Overview
This KHS Innopas P II SG 30-200 is a tunnel pasteurizer for bottled beverages in glass bottles
built in 1996 by KHS (Klöckner Holstein Seitz
Germany). With a treatment area of 113.5 m² across 8 treatment zones (3 of them recuperative)
it pasteurizes at approx. 24,000 - 25,000 bottles per hour depending on bottle format
at a maximum pasteurization temperature of 75 °C. For 0.7 l glass bottles the total treatment time is approx. 48.6 minutes (21.2 min heating
12.3 min pasteurization
15.0 min cooling) at approx. 5 pasteurization units
The main control is a Siemens SIMATIC S5 PLC
the pasteurization unit setting (temperature diagram) was later upgraded to a Siemens S7 with touch panel. Danfoss frequency drives are fitted. The machine ran at a German mineral water bottling plant until mid-2024 and is now completely dismantled and professionally stored
with the conveyor belt sections and components palletized - ready for immediate collection
Technical data
Equipment
Siemens SIMATIC S5 PLC (main control)
Pasteurization unit setting (temperature diagram) upgraded to Siemens S7 with touch panel
Danfoss frequency drives
Modular plastic conveyor belt with drainage openings
belt sections palletized
External pump assemblies and inspection windows
Electrical cabinets with main disconnect switch
Original KHS documentation (datasheets and drawings)
Condition
Used. The machine is completely dismantled and stored
belt sections
piping and components are palletized for transport. The machine can be visited on request
Availability