Обрабатывающий центр Maka PA 37

Preis: Contact us for price
MAKA Systems GmbH
Type: PA 37
Machining length: 11 m
Operating hours: 23.792
Spindle exchange: 08/2018
MAKA CNC 5-axis machining center PA 37
for machining of aluminum profiles
and (with clamping surface to be realized clamping surface) for aluminum sheets / plates
machining
Version
with NC support crosshead positioning
and with widened machine
base frame to accommodate the required
required drag chains
and with hydraulic workpiece clamping
Machine in travelling gantry design with
drive on both sides (gantry drive)
CNC-control BWO 930 in mobile operating
for 5-axis milling with RTCP function
memory 1 mB
with integrated PC with low power processor
1 GHz
hard disk 120 gB
with Windows-XP
10" touch-screen display with touch-screen
computer keyboard
Connections
1 x VCS for screen
4 x USB
1 x mouse
1 x keyboard
1 x RS 232
Ethernet 100 mB for connection to the CPU
network connection: Ethernet 10 mB
TCP/IP
at the CPU in the control cabinet
Travel ranges (axis designations X/Y exchanged for
exchanged over standard) =
X-axis approx. 12.100 mm
Y-axis approx. 2.350 mm
Z-axis approx. 800 mm
A-axis 196 ° (swivel axis +/- 98°)
B-axis 540 ' (rotary axis)
Rapid traverse speed Y-/X-axis 45 m/min
Z-axis 24 m/min
A-/C-axis 10,000 °/min
Machining unit
1 universal unit for 5-axis milling with
integrated swivel and rotary axis
Milling spindle water-cooled
nominal power 20 kW from 12.000 1/min
speed
infinitely variable up to 24.000 1/min. (236411)
with axis control left/right rotation for gear
thread cutting up to M 12
Room extraction for machining in 5-axis operation
operation
Tool interface HSK-F63 for automatic tool change
tool change
1 chain tool magazine with 32 places for tools up to
tools up to 90 mm 0 each
or up to max
max. 160 mm 0 and 160 mm total length from spindle (= with
length from spindle (= with 70 mm basic length for tool
for tool holder + 90 mm projection length)
Special tools up to 280 mm total length can be
be deposited and automatically exchanged
A saw blade with up to 350 mm 0 can be deposited in the
magazine and changed automatically (occupies
(occupies 5 storage places)
The magazine is arranged in the unit output position
sition. Partition wall between magazine and working
area for protection of tools against direct
direct flying chips
Milling spindle and 2 magazine positions set up
for angle/probe heads with torque support
torque support
Find more here
показать контакты
Contact us at
показать контакты