Двигатель MAN D2862LE476 для MAN D2862LE476









Если вы решили покупать технику по низкой цене, убедитесь, что вы общаетесь с реальным продавцом. Узнайте как можно больше информации о владельце техники. Один из способов обмана – это представлять себя за реально существующую компанию. В случае возникновения подозрений сообщите об этом нам для дополнительного контроля, через форму обратной связи.
Прежде чем вы решите совершить покупку, внимательно изучите несколько предложений по продаже, чтобы понять среднюю стоимость выбранной вами модели техники. Если цена понравившегося предложения намного ниже аналогичных предложений, задумайтесь. Значительная разница в цене может говорить о скрытых дефектах или о попытке продавца совершить мошеннические действия.
Не покупайте товары, цена которых слишком отличается от средней цены на аналогичную технику.
Не давайте согласия на сомнительные залоги и предоплаты товара. В случае сомнений не бойтесь уточнять детали, просите дополнительные фотографии и документы на технику, проверяйте подлинность документов, задавайте вопросы.
Самый распространенный тип мошенничества. Нечестные продавцы могут запрашивать определенную сумму аванса для «брони» вашего права на покупку техники. Таким образом мошенники могут собрать большую сумму и пропасть, больше не выходить на связь.
- Перевод предоплаты на карту
- Не вносите предоплату без оформления документов, подтверждающих процесс передачи денег, если во время общения продавец вызывает сомнения.
- Перевод на счет «доверенного лица»
- Подобная просьба должна настораживать, скорее всего, вы общаетесь с мошенником.
- Перевод на счет компании с похожим именем
- Будьте бдительны, мошенники могут маскироваться под известные компании, внося незначительные изменения в название. Не переводите средства, если название компании вызывает сомнения.
- Подстановка собственных реквизитов в инвойс реальной компании
- Прежде чем делать перевод, убедитесь в правильности указанных реквизитов и относятся ли они к указанной компании.
Контакты продавца


2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor